Home / Products / Stone Countertop / Marble Counter Top / Content

Products

Norway Red Marble Vanity Tops

Norway Red Marble
18mm thickness mitered edge
Polished surface

Send Inquiry

Fast Delievery
Quality Assurance
24/7 Customer Service

Product Introduction

Norway Red Marble Vanity Tops

Norway Red marble is also named Norwegian Red marble or Norwegian Rose marble, which is quarried in Norway.

We have stock for blocks or Random slabs for selection. Normally for the vanitytops production, we will select the good slabs from those stock, and then do the fabrication in our workshop.

For the vanitytops, the edge finish can be 18mm single edge with eased edge, bullnose edge, ogee edge;
or laminated 18+18mm double bullnose edge, double eased edge, double ogee edge;

or 4" mitered edge, 6" mitered edge, 8" mitered edge;

For the sink cutouts, it depends on the length of the vanitytops:

for 22" length, normally one sink cutout required;

for 31"/36"/42"/54", one sink cutout required;

for 61" length, one or 2 sink cutouts is possible;

for 72"/84"/96"108" length, 2 sink cutout are required;

We will drill the nut holes on the backside of the sink cutout, and then install the nuts into the stone, the local installers can install the undermount sinks directly and easily with the anchors and clips we supplied, which will be packed into the same crates.

Norway Red Marble stone is especially good for exterior/interior wall and floor applications, monuments, vanitytops, mosaic, fountains, pool and wall capping, stairs, window sills and other design projects. It also called Norwegian red stone market. Norway red Marble can be polished, sandblasted, tumbled, polished, honed, natural cleft or as per other customized surface finishing requirements.

Quality control

Our quality control system includes automatic detection and manual inspection. Our experienced QC team will carefully check specification of each stone and inspect the stone quality piece by piece. This follow-up efforts will last for the whole process regarding a completion of each order.
Quality details	1) Polished degree: 95 degree or up. 2) Thickness tolerance: +/-0.5mm 3) Diagonal tolerance : +/-1mm. 4) Surface flatness tolerance: +/-0.3mm. 5) Adjacent edge verticality tolerance: +/-0.5mm, Precise Cutting by infrared-ray-cut machine.
Inspection	1) Detailed process photos with measures will be sent for your confirmation. 2) Welcome to our factory for inspection. 3) Full inspection before every shipment.
After-sales service	Professional service team responsible for shipping and after-sales inquiries.